Kaihua provides comprehensive solution for standby power generation from 10-3000kva on factory. Usually use standby power source when main power shut down. Our product is designed to work indoor/outdoor environment condition, and will be met the requirement of factory noise, safety, static electricity and electromagnetic interference standard.
High quality generator sets with auto control function, can be paralleled to reach desire power output, ATS equipment on every gen-set ensures immediate switch and start generator when city power shut down.
Factory equipment under operation requires continuous and constant power supply , with a rigorous demand for instant start-up time, low noise, low emission and safety.
Tailored for environment
1.Working altitude suitable for 1000 meter or below
2.Working temperature with minimum of around -40’C (engine,alternator heater)and maximum around 50’C
3.Soundproof/Container type generator designed to being anti-rusty and it sufficiently avoid rain/sand/rock into the canopy, still maintain sufficient air intake. Low noise level of our soundproof gen-set. 30-40% noise level reduction compare to open type gen-set.
4.Auto-fuel-transfer system ensure engine to run continuously by transferring fuel from external tank to basement tank.
5.Standard basement fuel tank can work up to 8 hours, Large basement fuel tank can extend working hour to 12hours or 24hours, and auto fuel transfer system base on customer request.
1. Adopt world-famous engines and alternators with high reliability;
2. Prime generating sets can work continuously on load for 500 hours, withnon-fault time averaging at 2000-3000 hours, and fault restoration time averaging at 0.5 hour;
3. Intelligent monitoring, parallel and grid-connected technology realize the generating set power the most perfect black start seamless connection with city electricity.
4. Advanced weatherdust and sand proof design, marvelous spray coating technology and excellent tankenable generating sets to adapt to extremely hostile environment such as ultra-high and low temperature, high salt content and high humidity.
Tailored product designs and material selection can meet the requirements of various industries and fields.